Seamless Gutter Replacement in Lancaster, PA

Seamless gutter replacement swaps your old sectional or worn-out gutters for new aluminum gutters roll-formed from a coil on site, cut to the exact length of each run. For Lancaster County homes whose gutters overflow, leak at the joints or have pulled away from the fascia, new seamless gutters sized for the roof usually fix the problem for good.

Signs your gutters need replacing

Leaks at many joints, not just one or two
Runs that sag between hangers or hold standing water
Overflow in normal storms even right after a cleaning
Rust holes in old steel gutters
Gutters that have been bent by ladders, ice or falling limbs
Fascia behind the gutter that's soft or rotted

Why do so many Lancaster County gutters overflow?

Two reasons come up again and again. First, many suburban houses got the smallest gutters and fewest downspouts the builder could get away with. Second, roof valleys concentrate a lot of water into one corner. Lancaster averages about 44 inches of precipitation a year, and summer storms can deliver an inch or more quickly. A 5-inch gutter with one downspout at the far end of a long run can't keep up, and the overflow lands right at the foundation.

What should a replacement include?

Removal and disposal of the old gutters and downspouts
A check of the fascia and repair of soft spots before new gutters go up
Gutter size chosen for each roof section, often 5-inch or 6-inch K-style
Downspout count and size, including extra outlets near valleys
Hidden hangers at close spacing, screwed into solid wood
Proper pitch toward each outlet
Extensions or a plan to carry water away from the foundation

What affects the cost?

Length and stories. Total feet of gutter and how high the walls are.
Size and gauge. 6-inch and heavier-gauge aluminum cost more.
Downspouts. Number, size and how far they run.
Fascia repair. Rotted boards add labor and material.
Guards. Adding them now is usually cheaper than a separate visit later.

We don't quote prices. The installer you're connected with measures and prices the job.

Replace everything or just one side?

If one run is damaged and the rest are sound, replacing only that run is reasonable, though the color may not match exactly. If the whole system is old, undersized or failing at several spots, replacing it all at once gives you a matched system sized for the roof. Older houses with half-round gutters may want half-round replacement instead.

Towns where we connect you

Common questions

What size gutters should my house have?

Many homes have 5-inch K-style gutters. Large, steep or valley-heavy roof sections often do better with 6-inch gutters and 3-by-4-inch downspouts. The installer should explain the sizing for your roof.

Should I replace gutters before or after a new roof?

Usually after, or at the same time. Roofers often remove or damage gutters while replacing drip edge, so coordinating the two saves money.

Are seamless gutters really seamless?

The long straight runs have no joints. Corners, end caps and outlets are still joined and sealed, so those are the spots to watch.

Related services

More background: Lancaster County gutter guard guide.